WELCOME!
Below are excerpts of the latest Allard news - just click a headline to read the whole story. If you own an Allard and would like to know more about it, please click here to contact us. We hope you enjoy the site!
Friday, July 1, 2011 at 11:00PM 
Click here to view a photo blog of the Burt Collection's restoration of their Allard J2 #1739. The photos are fantastic, enjoy!
Allard, Burrel, Burt, J2, Restoration in RESTORATION Thursday, October 21, 2010 at 9:47PM 
From Lindsey Parsons...
The car recently arrived home. I have included a shot of J2X 3077 as it returned home from the rally mishap three years ago. It looks like a different car completely now. My long distaste held for chrome is definitely reflected in the new configuration. The painted wheels and internally contained spare tire give the car a much more classic look to my eye.
Allard, J2x, Restoration in RESTORATION Sunday, October 25, 2009 at 1:02PM 
By Roger Murray-Evans
In early September '09, I got the word that that an Allard P2 Monte Carlo saloon located in Wales was looking for a home. Its owner from 1982 had long term health problems and was re-locating to Malta, and was seeking a new home urgently. Back in the late '70's, at an AOC monthly club night at the George 1V, Portugal Street, London, a couple of lads appeared and were chatting about a certain P2 with a Cadillac engine that they were/had buying/bought.
Allard, P2, Restoration, Sydney in RESTORATION Wednesday, July 22, 2009 at 9:57PM 
The cowl was painted first then the nose, tail and other parts. After cleaning the aluminum with an aircraft cleaner, the aluminum was primed with PPG epoxy primer followed by a sanding primer. I used an enamel for the finish coat so I could polish out any defects. At this point I discovered my spray gun was totally worn out and causing problems in the paint. I could not stop, and hoped that the defects could be polished out. Some could not. I installed the nose section first so I could install the lights – then the tail, fenders and doors.
Allard, J2x, Restoration in RESTORATION Tuesday, July 21, 2009 at 8:34PM 
I had been working on the car for about 12 hours when I quit for the this June day, went to the house, had supper and went to bed. About midnight I woke up with chills and a fever of 104. Early the next morning I headed for the emergency room where they admitted me to the hospital with pneumonia. A week later I came home but was too weak to work on the car. This set me back a whole month. At this point I was not sure that I could complete the restoration by the October deadline. (A word of caution for those of you who spray paint: even though I used a proper mask and filters I think the cause of my pneumonia was due to paint fumes. My recommendation – get a respirator with an outside air supply). During this month I did do some machine work and fabricated new door latches from brass, then had them chrome plated.
Allard, J2x, Restoration in RESTORATION Monday, July 20, 2009 at 7:19PM 
THE SECOND RESTORATION
The Texas World Speedway at Bryan, Texas was chosen as the site for the 2004 ‘Gathering of the Clan’ reunion for Allard owners. In 1969 I had opened the then-named Texas International Speedway with my Allard, the only one there. So I felt it imperative that I attend this Gathering. The car was not in shape for show, so in December 2003 I started a clean up that grew into another frame-off restoration. The completion date had to be no later than October 31, 2004.
J2x, Restoration in RESTORATION Sunday, July 19, 2009 at 1:46PM 
THE FIRST RESTORATION
It was quite evident early on that this car needed a total restoration. The years of hard racing had taken its toll. At only 9 years old it was completely worn out.
#3059 was shipped without engine or transmission to a dealer in Wisconsin in 1952. The original color was British Racing Green with cream colored leather upholstery. The dealer installed a full-race Chrysler Hemi and a 1937 Cad-LaSalle transmission. The car was raced in this configuration until the late 50’s when SCCA changed the rules to prohibit cycle fenders. Thus ‘The Bitch’ was retired. The engine was removed and placed in a dirt track car where it expired by exploding. When we bought the car, the owner had replaced the Chrysler with a junkyard Cadillac. After a careful inspection I found the engine had three cracked main bearing webs, so decided to scrap it and a search for a replacement.
Allard, J2x, Restoration in RESTORATION Sunday, July 19, 2009 at 1:40PM 
Click here or on the photo above to view 3 photo galleries of this beautiful M Types transformation
My M type is chassis no. 716. I bought it November 2005.
35 years ago I had another M type, chassis no. 823 reg. no. JC 9688 which won many concours awards. I sold it to finance a business venture and often regretted it even though the business venture was successful. My old carhas beenregularly rallied by its present owners, John and Kate Manley-Tucker including the Alpine and the Paris-Peking.
Allard, M, Restoration in RESTORATION Saturday, July 18, 2009 at 2:40PM By Bill Bauder
All true car enthusiasts have had a love affair with a car at some time in their life. When I say “love,” I don’t mean the kind of love you have for your mother or children – but the kind of love that’s foot-stomping passionate, obsessive, secretive and suicidal. The ‘I can’t live without’ kind of love. Well this story is about my love affair for one automobile, how it was obtained, why it was so named and how it was restored. Hope you enjoy it.
J2x, Restoration in RESTORATION